All Products

Condenser for Slushie Stars Machine

Main Computer Board for Slushie Stars Machine

Computer Board Transformer for Slushie Stars Machine

Axial Fan For Slushie Stars Machine features low noise, high temperature endurance, and a super long life.

Motor For Stirring The juice inside the tank of the Arcooda Slushie Stars slush and cold machine

Water Box Catchment Tray for Slushie Stars Machine

Handle Spout Set for Slushie Stars Machine

Black Plastic Support Foot for Slushie Stars Machine

Seal Ring For Spout Of Slushie Stars Machine

Convex Seal Ring For Stirring Blade on the Slushie Stars Machine.

Black PVC Cover for top of Tank for Slushie Stars Machine, with built in LED and magnetic on/off function to eliminate loose cables as seen in inferior slushie machines.

Replacement Seal Ring for Slushie Stars Slushie Machine Tank.

Fuse Holder For The Tempest Machine as well as other Arcooda arcade machines. Includes fuse.

Illuminated Red Service Button is suitable for arcade machines that include Game Wizard Xtreme, Tempest and many others. 16mm size supports 5-24volt input.

Illuminated Green Test Button is suitable for arcade machines that include Game Wizard Xtreme, Tempest and many others. 16mm size supports 5-24volt input.

European standard power cable 1.5m length

Y782 lock and key set (blue) for Arcooda & Highway Machines is suitable for many machines including cocktail tables, Tempest, Game Wizard for Android and Mercury.

Graphics Card For The Harley Davidson Arcade Machine

European Plug Adapter In White

Red sanwa snap-in OBSF-24 button: Widely used for buttons in Japanese cabinets like Blast City, Versus City, etc. It features a slightly convex plunger and snap-in installation (can be mounted in material with a thickness from 2 to 5 mm).

Add the Game Wizard Add-on bundle to your Tempest Acade machine so that it can support Playstation 5, XBOX Series X, PC, Android, Raspberry Pi, and more.
This bundle includes everything you need to upgrade your Tempest Arcade Machine to unlock the power of Game Wizard. Suitable for both sitdown and upright version Tempest machines.

Power Socket IEC Power Connector IEC C14 Inlet suitable for Highway and Arcooda arcade machines.

This tilt bob is suitable for your pinball, crane, and arcade machines. They rely simply on the swinging bob making contact with the lower ring to close a circuit, which can then be used to send a signal to your software to tell the game to tilt.

Sega Model 2/Model 3 to Jamma Adaptor with AMP board Wiring Harness Set

SEGA NAOMI ARCADE GAME VOLUME TEST SERVICE PANEL PART# S-SDW-0369-01

Pedal Assembly for Arcade DIY Gun Games with internal on/off switch.

Tall American Style Joystick fits wooden and metal control panels, it comes with 4 way and 8 way directions in perfect performance.

Compact joystick is designed in small compact size to fit existing control panels.

Modern joystick designs in smart outlook with flexible function, we are sure it will be useful for your arcade machine.

8 Way Green Ellipse Joystick, a fashion joystick designs in strong construction with 8 way square restrictor plate. Standard mounting plate is made by high quality metal, do not easily scratch with skilled plating.

A practical joystick is made by plastic construction, and it is used for arcade game machine and video game machine widely, a full direction and exactly control that can make you have a wonderful arcade game feeling.

Universal microswitch joystick is equipped with wire harness, 5 pin connector and 35mm top ball which will be useful for arcade machine.

Universal microswitch joystick is equipped with wire harness, 5 pin connector and 35mm top ball which will be useful for arcade machine.

P2040 G-N-X Power Supply is especially used in crane machines, and offers +5V, +12V, +24V, +48V power at maximum of 250-280watts. The P2040 is a switchable power supply with 110-240volt input.

P15DG-X Weiya Switching Power Supply for Crane Machine supports +5V, +12V, +24V, +48V with switchable 110-240 volt input.

Plug and play Sega Model 3 power supply to ATX power supply adapter, just add your own ATX power supply and use this wiring kit to connect your Sega games including Daytona and Sega Rally.

Action Deka is a motion controlled simulation arcade machine released by Konami, with fighting exciting attacks by a controller on hand.

33mm Concave Pink Push Button is a budget solution to replace the fire button on the general arcade cabinets and home console fight stick . Each button is built-in momentary contact microswitch and screw nut for installation.

33mm Convex Dark Green/Turquoise Push Button is a budget solution to replace the fire button on the general arcade cabinets and home console fight stick . Each button is built-in momentary contact microswitch and screw nut for installation.

33mm Concave Dark Green/Turquoise Push Button is a budget solution to replace the fire button on the general arcade cabinets and home console fight stick . Each button is built-in momentary contact microswitch and screw nut for installation.

33mm Concave Blue Push Button is a budget solution to replace the fire button on the general arcade cabinets and home console fight stick . Each button is built-in momentary contact microswitch and screw nut for installation.

33mm Convex Green Push Button is a budget solution to replace the fire button on the general arcade cabinets and home console fight stick . Each button is built-in momentary contact microswitch and screw nut for installation.

33mm Concave Yellow Push Button is a budget solution to replace the fire button on the general arcade cabinets and home console fight stick . Each button is built-in momentary contact microswitch and screw nut for installation.

Durable Drink Holder (Flexible Plastic) gives you access to a cup holder almost anywhere. Holds Cups Bottles or Cans. Fits Into Most Auto Window Channels. Easy install, no tools required

Using the RGB CGA to VGA converter to connect older CGA game board such as Tekken, Final Fight, or EGA games such as Daytona / Harley Davidson, and your playstation 3 / XBOX360 into VGA and high definition monitors (either plasma or LCD). It allows all your 15khz combined sync CGA and 25khz EGA games to be converted into a signal which can be displayed on your 31khz CRT arcade monitor, or any late model LCD/plasma/projector.

A PVC plastic handle for DIY arcade cabinet. Installing a pair of this handle at the back of the arcade cabinet helps better gripping for moving the cabinets. Made of durable PVC plastic.

Our 1 Player Push Button with Microswitch is a standard arcade push button with horizontal microswitch, silk printed with 1 Player logo. Made of durable nylon plastic to withstand at least 10,000,000 presses. Ideal for "Start" buttons of arcade machine.

Two Player Arcade Kit for PC (DIY Type E) American Style is for Zero delay USB encoder for PC + Happ style joystick + American switch button (with microswitch).

Two Player Arcade Kit for PC (DIY Type D) Illuminated Set is the second generation USB joystick control chip that update the switch plug for 5v lighing button.

DIY Illuminated USB Keymapped 2 Player Kit is a multifunctional USB joystick control chip (4 axis 12 buttons 1POV) controller, the circuit is compatible with USB1.0/USB2.0 and supports Win98 / Win Me/Win 2000 / Win XP. And passed USB Check and Hid View Tests. 4 axis 12KEY 1POV Default interface in Windows: