Coin Mechs

The EMP Anti Cheater Device has been specially designed to secure your machines from cheaters and has the owner in mind. To maximise the benefit, please keep track of the counter each time you audit the machine as well as advertise to your customers and staff that the machines are protected with a anti cheater device.

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.

Australian Bank Note Acceptor / Reader made by Japan Cash Machine Co Ltd.
It is supplied with it's own mounting faceplate.

The mech contains intelligent sensing algorithms, which allow the acceptors to provide accurate, reliable validation.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate upto 12 different coins and/or tokens. Latest validator technology ensures high control over acceptance of programmed coin types and rejection of fakes.
The C120 coin mechanism can be used for new or retrofit applications in the Arcade, Pinball, Gaming and Vending areas.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate upto 6 different coins and/or tokens. Latest validator technology ensures high control over acceptance of programmed coin types and rejection of fakes.
The C120 coin mechanism can be used for new or retrofit applications in the Arcade, Pinball, Gaming and Vending areas.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 5 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

The Coin Controls C220B Electronic Coin Mech with Front Load / Bottom Reject is a United Kingdom manufactured coin mechanism and the unit comes with a 15 pin parallel interface and 5 pin serial interface. The coin mechanism can be programmed to accept eight different types of coins.

The Coin Controls C220B Electronic Coin Mech with Top Load/Bottom Reject is a United Kingdom manufactured coin mechanism, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mechanism can be programmed to accept eight different types of coins.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

The Comestero Face Plate is designed to attach to the front of a note acceptor, and acts as a feeder. Simply feed your bank note through the faceplate and it will feed it through to the acceptor.

Innovative Technology currency note reader. Model number NV8.

Suited for use with a Microcoin Coin mechanism.

The Mars MS111 coin mechanisms series are 4 coin acceptors. The interface is Positive Common Interface only. The unit is 12V working (will work between 10V - 15V). The coin mechanism can be identified by its wiring. This coin mech is Top Load with Bottom Reject.

MS100 electronic coin mechanism. 4-Coin acceptor with a Positive Common Interface only. It needs a 12 volt supply 2.3A Peak (at moment of coin acceptance). The acceptor has a 13 pin connector.

Full coin mech assembly including face place and Australian $1 mechanical coin mechanism, and microswitch.

The coin validator from microcoin, main feature is versatility by it's many programming options. Allowing it to be fully tailored to meet the operators requirements.

A top loading electronic coin mech, with enhanced security features over the S5 & S6 models. Due to the enhanced security these mechs are generally used in gaming machines.

A replacement 10 wire flat ribbon cable which can be used with NRI coin mechs and equivalent (C120, RM5, etc). The cable is 1 metre long, giving you enough length for installation into any cabinet. The interface is the standard 10pin connector on each end, which goes from the coin mech to the credit board of the machine.

A bottom rejecting coin validator using accurate measurement technology with a large number of options for credit counting and vending-machine communication.

Pacific Coin Validator PCB: Model - Pacific 02

The RM5 Evolution is an electronic coin validator for Australian coins. It is made in Italy and is a very high quality product. The RM5 Evolution is a Top Load/Bottom Reject mechanism, but can be adapted to be front loading through the use of an RM5 faceplate, however it will always be bottom rejecting.

The RM5 Evolution RM5-T10 is a Dual Price Totaliser with timer function. It is an electronic coin validator that allows any service, where cost is determined by time used, to be paid automatically. It is particularly suited to car washes, parking meters, laundromats and other self service applications. The validator itself is Top Load/Front Reject, but can be adapted to Front Load/Front Reject through the use of an RM5 face plate.

The RM5 Evolution is a series of high quality, Italian made electronic coin validators. The RM5T30 model is Top Load/Front Reject mechanism, but can be adapted to Front Load/Front Reject, through the use of an RM5 faceplate. When using the top loading face plate, the RM5 Evolution is completely interchangeable with NRI or C120 coin mechanisms.

A front loading electronic coin mechanism with a face plate. The device contains a CPU anti-string program that prevents customers from tricking the coin mechanism into giving free credits.

An electronic coin validator, that runs off 12V and connects directly to the coin counter. It provides a number of security features including the ability to be connected to an alarm.

A credit board used with QL, NRI & C120 coin mechs. The credit board has 8 dip switches for easy changing of pricing for credits. It also allows for 6 modes of operation.