Arcade Parts

Saturn game controller: press and hold start and button a for 3 seconds, D-Pad can be turned to X/Y analog axis mode . N64 game controller: press and hold start and button A for 3 seconds, the function of D-Pad and Joystick can be exchanged. PS2 game controller: press analog, left stick is X/Y analog axis mode, right stick is Z axis mode, and D-Pad is POV and button mode.

$2 = 1play sticker

These 1000 Miglia Round Porsche 550A Stickers from Kaneko are in excellent condition. You can personalise your arcade machine or gaming area with these bright and colourful stickers. With a simple design, this product is great for anyone wishing to add some excitment to their gaming experience. In as-new condition; this is an offer you dont want to miss! Update your machine or location today!

12 Volt Power Amp PCB Board.

12Volt 9Amp Power Supply 110 volts to 240 volts suitable for Arcade Cabinets.

12 Way Plug Housing. Does not have clip on side of connector for gripping.

This is a 20 Amp Power Supply suitable for arcade machines.

This is a 20 inch CGA Chassis Suitable for 20 inch CGA Tube monitors. Normally found in cocktail machines or older arcade cabinets, use this chassis to repair tired or damaged chassis.

240 volt to 12 volt transformer.

240 volt power board with on/off switch and noise filter.

Crisis Zone 24v Power Supply (including 5v + 12v) to provide power for the gun.

This is a 29 inch CRT Monitor Chassis Board suitable for a wide range of arcade machines such as Blast City, Time Crisis and Daytona USA. This product is multi-frequency (15K / 24K / 31K) and has the ability to switch over frequency automatically.

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

A 3 terminal button actuator microswitch to fit all types of push buttons and joysticks.

A 3" wheel built from polyurethane, designed to take heavy loads. Made with a mounting bracket to allow for easy assembly.

High efficiency and Low temperature 3.3 Volt, 5 Volt, 12 Volt Power Supply suitable for all late model CRT and LCD Arcade Cabinets. Ideal for current series game boards including Taito X2, Chihiro, Lindberg, Naomi and more.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

A 4-digit display timer to activate time service through a connection to a mechanical coin mechanism.

A 4 digital display with the housing and wiring to easily mount into a machine.

A 4 digital display with the wiring to easily mount into a machine.

A 5 pin connector

5 Pin Harness For Joystick (Suitable for Sanwa and Seimitsu)

Acclaim Sound Board Model 1065

Acclaim Sound Board Model 375

Acclaim Sound Board Model 774

Acclaim Sound Board Model 993

Adjoining top coin entry for use on flat surfaces. Smaller dimensions for ease of installation.

Adjoining top coin entry for use on sloped surfaces.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

This large Alpine Racer hard header from Namco is designed specifically for that title arcade machine. It will be useful to customers wanting to replace old or damaged headers, or, customers looking to upgrade or recondition their machine. Alpine Racer is a 3D Alpine skiing arcade game released by Namco in 1995. It features downhill and gate with three courses and two play modes - Race and Time Attack. The player stands on a set of ski-like foot stands while holding onto two bars for stability to play. The design includes a light blue background with the title as the main focus – outlined in yellow and orange – and also includes the Namco logo along the bottom.

5 pin male connector, each pin is split in half. Design as a housing connector for amusement equipment.

6 pin male connector, each pin is split in half. Design as a housing connector for amusement equipment.

AMP 9 Way Plug Housing, each pin is split in half. Design as a housing connector for amusement equipment.

Amplifier Power Supply PCB
Active Crossover PCB
Wiring
Cords

American Push Button

Arcade Joystick Ball Top - Pink

Our cam lock with removable barrel is 18mm wide and 19mm long and it comes with two plastic head brass keys. It is ideal for arcade machines, vending machines and comes in a range of sizes to suit all your needs. There are 720 different key cut combinations available. We can also customize the latch and loading mechanism to suit your specifications.

The Arcade Machine Cam lock with Removable Barrel 30mm K3005 lock is suitable for use in coin doors, machine doors, gaming machines, vending machines, filing cabinets, parking meters, coin laundry machines, cash dispensers, payphones and is available in a range of sizes suitable for all applications.

Arcade Machine Lock 16mm has chrome finished zinc alloy housing and cylinder, 90 degress rotation cam. Suitable for using in many kinds of arcade and amusement machines, doors and cabinets.

Zinc Alloy Lock

Brand New Test panel featuring a meter, a volume dial, a test button and a service button.

Switching power supply (220-240volts only) for arcade machines, 16AMP, -12volt output. Suitable for most cocktail tables and arcade video cabinets.

Arcade Push Button with Microswitch is a standard American style snap-in push button which is widely used on arcade cabinets.

33mm arcade push button - Colour White. Includes microswitch.

Add true HI-FI sound to your arcade machine with the arcade sound amplifier box with MP3 input. Has separate volume, bass and treble controls as well as MP3 input with simple plug and play setup.

Hard plastic steering wheel made by Happ Controls.