All Products

The Boxer Machine is an entertainment game which measures the punch strength of the player. Players can compete against each other, where the strongest punch will be rewarded by a light and sound presentation as well as they will receive one extra credit.

Percussion Master is a drum machine from IGS. Players must hit the drums in time with the music, with success requiring good timing and a good sense of rhythm.

Innovative Technology NV10 Currency Note Reader. UK notes programmed: 5, 10, 20 & 50.
Note Feeder chute included.

A 5 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp/switch is not included). Made by Spain's Industrias Lorenzo company.

A chrome finished zinc alloy die cast chrome plated housing and cylinder, 90 degress rotation cam. Suitable for using in many kinds of machines, doors and cabinets.

The coin validator from microcoin, main feature is versatility by it's many programming options. Allowing it to be fully tailored to meet the operators requirements.

Stay Cool DDR Metal Header

Atari 7586-DH-2LAEXTM

These light globes are generic pinball light globes (GE-44) and they are suitable for most pinball machines.

Deluxe machines like Daytona have the 50" rear projector tvs. The game board output RGB and these cables connector from the game to the TV as BNC connectors. The fourth cord is for sync and there is also a power cable if needed.

A test panel complete with Service Button, Test Switch and 12V coin counter. Includes wiring for power and ground.

Non Original Display Rom for a Roller Coaster Tycoon Pinball Machine.

Replacement light globe/bulb for the disco lights. Designed for DDR dance machines. 12V, 20W.

This fits in the corners of the floor panels of your DDR dance machines. They provide rubber corner protection of the components underneath the panel and help to keep everything in place.

A white wheel connected to a metal bracket which can be connected to anything with it's 4 screw points or by welding.

Drum Mania Rubber Pad for Drum Pad Assembly. Can be used to replace Snare, High Tom and Low Tom parts. Also suitable for use with Percussion Freaks.

Drum mania rubber pad for Cymbal Pad or Hi Hat Assembly. Also suitable for use with Percussion Freaks.

Pump It Up Step Acrylic panel arrows are made of solid and durable acrylic material, suitable to replace the used dance platform's foot pads. customer screw out the metal square cover, then replace the new step acrylic pads on it, very easy and simple to recondition the used PIU dancing stage into "new" look.

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

A standard length Jamma finger. Ideal for do it yourself work. Pins are clearly marked for ease of use.

Large Hole Cover

Small Hole Cover

Cable Gland

Potentiometer Knobs

Potentiometer (Dual) 50 ohm

TYCO ELECTRONICS Universal Mate Receptacle Housing, 4 Way N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 4 pin Female connector to be used with the 4 pin Male connector of the same series.

TYCO ELECTRONICS 15 Way Receptacle Housing. Brand New

Spade cover for speaker terminals, power leads and lugs.

TYCO ELECTRONICS / AMP 9 Way Plug Housing. Brand New, Plug only.

MOLEX 12 Way Receptacle Plug. Brand New

12 Volt Power Amp PCB Board.

A wiring Harness that is part of the cables needed to allow Naomi Hardware system games to be plugged into a Jamma Cabinet. The harness also comes with a Sound Amp.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

A replacement for the main PCB of the Boxer Matrix machine.

Western Dream Interrupter Board

LAI Relay PCB

DDR Red floor neon light part for your Dance Dance Revolution (DDR) floor panel.

The gun board expansion slot used with Atomiswave motherboards for gun games like Extreme Hunting.

240 volt to 12 volt transformer.

A Interface PCB for the Star Print system used in Pacific Gaming machines.

Bladed Microswitch made by FTM. For use with arcade buttons for short panels.

Cam metal door lock with key in 15mm length cylinder including latch. The key can be removed only in the locked position. 90 degree turn between locked and unlocked positions.

This noise filter is designed for low impedance loads to supress line to ground and line to line interference. The filter is enclosed in a metal case and terminals on both sides.

A 6 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp is included). Made by Spain's Industrias Lorenzo company.

A noise filter designed to have 250V plugged directly into it with a maximum load of 6A. Has 3 terminals at the back to wire in the power.

Fluorescent Ballast For 15W Lamp is a durable and long lasting semi low loss ballast for a fluorescent 15W lamp from ATCO. This ballast emits a massive power of 250v / 50Hz and is suitable for most fluorescent light applications. Furthermore coming from a credible manufacturer such as ATCO, you know that you are going to have bright powerful lights for a long time.

A compact power supply that outputs at 24V 2.3A. The Input can be 100~250V 1.6A 50/60/440Hz or DC 120~300 1A.