All Products

TYCO ELECTRONICS 15 Way Receptacle Housing. Brand New

12 Volt Power Amp PCB Board.

A wiring Harness that is part of the cables needed to allow Naomi Hardware system games to be plugged into a Jamma Cabinet. The harness also comes with a Sound Amp.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

Spade cover for speaker terminals, power leads and lugs.

TYCO ELECTRONICS Universal Mate Receptacle Housing, 4 Way N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 4 pin Female connector to be used with the 4 pin Male connector of the same series.

Pump It Up Step Acrylic panel arrows are made of solid and durable acrylic material, suitable to replace the used dance platform's foot pads. customer screw out the metal square cover, then replace the new step acrylic pads on it, very easy and simple to recondition the used PIU dancing stage into "new" look.

Potentiometer (Dual) 50 ohm

A standard length Jamma finger. Ideal for do it yourself work. Pins are clearly marked for ease of use.

Large Hole Cover

Small Hole Cover

Cable Gland

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

Western Dream Interrupter Board

LAI Relay PCB

DDR Red floor neon light part for your Dance Dance Revolution (DDR) floor panel.

The gun board expansion slot used with Atomiswave motherboards for gun games like Extreme Hunting.

Cam metal door lock with key in 15mm length cylinder including latch. The key can be removed only in the locked position. 90 degree turn between locked and unlocked positions.

This noise filter is designed for low impedance loads to supress line to ground and line to line interference. The filter is enclosed in a metal case and terminals on both sides.

A 6 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp is included). Made by Spain's Industrias Lorenzo company.

A noise filter designed to have 250V plugged directly into it with a maximum load of 6A. Has 3 terminals at the back to wire in the power.

A Interface PCB for the Star Print system used in Pacific Gaming machines.

240 volt to 12 volt transformer.

Bladed Microswitch made by FTM. For use with arcade buttons for short panels.

A Blanking Plate is used to cover holes in equipment. In such equipment as arcade and gaming machines, cars, etc.

Fluorescent Ballast For 15W Lamp is a durable and long lasting semi low loss ballast for a fluorescent 15W lamp from ATCO. This ballast emits a massive power of 250v / 50Hz and is suitable for most fluorescent light applications. Furthermore coming from a credible manufacturer such as ATCO, you know that you are going to have bright powerful lights for a long time.

Tiger Scan is specially designed for less demanding applications. It is has a number of great features such as rotating gobos with indexed position, two-colour and rainbow effect beams and many others.

A compact power supply that outputs at 24V 2.3A. The Input can be 100~250V 1.6A 50/60/440Hz or DC 120~300 1A.

plastic tube

Micro Board

Original Manual
100 pages

• Dip Switch settings
• Wiring Schematics

E128122 Board

Bi Colour LED Number Board

DBSS MK-11 Board

This Watch Out Cabinet Sticker is for the right side of the arcade machine, and was developed specifically for the crane machine, the Watch Out Skill Tester cabinet. This sticker will be useful for customers who are needing to replace a sticker on their cabinet; who are reconditioning one of these skill tester machines; or, are wanting to upgrade a cabinet of the same proportions to this title.

Plastic disk

Elbows

TECO BB Board

auto light bulbs

Metal Shaft Glass Top

Replacement 28mm nut for dummy buttons.

Interposer PCB

Interposer PCB (Different Model)

Route 66- Dreamcast memory card or rumble pack