All Products

The Fast Blow 5amp Fuse F5AL250v is a glass cartridge fuse which is ideal for providing protection to devices and internal circuits. Featuring weaker components (by design), the Fast Blow 5amp Fuse F5AL250v will blow when too much current is drawing, cutting off the power and saving your machine's internals.

$2 = 1play sticker

T-moulding is used on the edges of arcade machines to protect the underlying wood/metal cabinet from damage. It also gives your machine a retro arcade look.

This is a 10 Player Luxury cabinet with bright led lights. It has a 65" LCD monitor and comes with high quality joysticks, Shoot & Weapon buttons. This machine also has Key in /Key out function and powerful Stereo Loud Speakers for enhanced gaming experience

This is an 10 Player Luxury cabinet with bright led lights. It has a 55" LCD monitor and comes with high quality joysticks, Shoot & Weapon buttons. This machine also has Key in /Key out function and powerful Stereo Loud Speakers for enhanced gaming experience

This is an 10 Player Luxury cabinet with bright led lights. It has a 55" LCD monitor and comes with high quality joysticks, Shoot & Weapon buttons. This machine also has Key in /Key out function and powerful Stereo Loud Speakers for enhanced gaming experience

This is an 10 Player Luxury cabinet with bright led lights. It has a 55" LCD monitor and comes with high quality joysticks, Shoot & Weapon buttons. This machine also has Key in /Key out function and powerful Stereo Loud Speakers for enhanced gaming experience

100 & Medal Geki KAZAAAN!! is a physical lottery-type medal game where you shoot a ball and climb a three-tiered volcano to reach the jackpot at the top.

Aim for the blizzard rush with 100 yen or MEDAL!
The third installment of the ``100&Medal'' series of medal games that you can easily enjoy using either medals or 100 yen coins. This time the stage is an iceberg.

12 Volt Power Amp PCB Board.

12Volt 9Amp Power Supply 110 volts to 240 volts suitable for Arcade Cabinets.

The 12 Volt Power Supply for Arcooda Machines is a plug and play power supply, suitable for use in all Arcooda machines. It is a great replacement or spare for your worn or dead power supplies, and with its plug and play features it is very easy to install yourself. Voltage also includes 5volts.

LED Light Bulb (Blue) 12V with10mm Wedge Base is suitable for most of the illuminated buttons.

LED Light Bulb (Green) 12V with10mm Wedge Base is suitable for most of the illuminated buttons.

LED Light Bulb (Red) 12V with10mm Wedge Base is suitable for most of the illuminated buttons.

LED Light Bulb (White) 12V with10mm Wedge Base is suitable for most of the illuminated buttons.

LED Light Bulb (Yellow) 12V with10mm Wedge Base is suitable for most of the illuminated buttons.

The 12V Stereo Arcade Amplifier features treble, bass and volume controls, and is the perfect way to customise the sounds on your machine. This amplifier has 180W output and requires 12V. It also contains an on/off power button on the front of the unit for easy access.

This power cord is a 15 Amp ~ 240V Australian power cord - it has a third prong which is wider than the standard Australian plug and suitable for industrial applications such as welders, air conditioners, and larger arcade machines.

Our Slushie Stars 15 L / 4 US gallon tank, can serve anything from gravitas and smoothies to iced or frozen coffee/tea and frozen cocktails. This unit is sure to expand your beverage menu substantially.

A 16 Pin Ribbon Cable that is 30cm long. This ribbon cable has a female 2x8 IDC connector on each end which can be plugged into 2x8 box headers. This cable is great for electronic projects, and works well with our coin mechs.

A 16 Pin Ribbon Cable that is 50cm long. This ribbon cable has a female 2x8 IDC connector on each end which can be plugged into 2x8 box headers. This cable is great for electronic projects, and works well with our coin mechs.

This is a 20 inch CGA Chassis Suitable for 20 inch CGA Tube monitors. This monitor chassis board is made by Weiya, model C2820H.

This is a 20 inch CGA Chassis Suitable for 20 inch CGA Tube monitors. This monitor chassis board is made by Weiya, model C2820H. This chassis is a returned unit from a customer.

22" LCD arcade Monitor suitable for Classic Arcade Cocktail Table. Accepts VGA and DVI input timings upto PC WUXGA 1920*1200 and HD 2048*1080p DCI 2K (256∶135 ≈ 1.9)

A professional 23.8 inch LG LCD Panel Arcade Monitor with Touchscreen designed for all arcade machines. This monitor offers a 16:9 viewing ratio with VGA and HDMI inputs and supports 15khz/31khz as well as high definition up to 1920 x 1080 Full HD resolution. Low response time, great colour depth and with full mounting frame, makes this monitor a great replacement for any arcade machine.

240 volt to 12 volt transformer.

240 volts to 110 volts stepdown transformer with 2x 110volt outlets. Suitable for any standard amusement machine such as upright cabinets, etc....

240 volt power board with on/off switch and noise filter.

This Black 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.

This Blue 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation. Perfect for steel or plastic control panels.

This Green 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.

This Pink 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.

This Red 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.

This White 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.

This Yellow 24mm Round Arcade Push Button with Built-In Microswitch is an economic substitute for the popular brand name push button on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.

24V DC 269RPM Motor (Shinano Kenshi DCG-3212-021)

Crisis Zone 24v Power Supply (including 5v + 12v) to provide power for the gun.

Designed to hold fuses up to 16A for 250V equipment. The fuses is screwed into the holder. The holder has also be screwed into the equipment for ease of use. The holder has 4 terminals.

AUO 26 Inch full 1080P HD 1920 x 1080 at 60Hz LCD Monitor, most suitable for Arcooda Deluxe cocktail table series, Arcade Master and Classic Master. Supports VGA and HDMI with separate monitor adjustment board.

AUO 26 Inch full 1080P HD 1920 x 1080 at 60Hz LCD Monitor, most suitable for Arcooda Deluxe cocktail table series, Arcade Master and Classic Master. Supports VGA and HDMI with separate monitor adjustment board.

AD PCB Board for 26 Inch LCD from Game Wizard on Android

26 inch LCD monitor uses the LTA260AP04 Samsung panel, and allows inputs for VGA, DVI and HDMI with resolution up to 720P.

The 26 inch LCD Plastic arcade cabinet is a Blast City clone cabinet, brand new, with Sanwa joystick and buttons, and includes 500 games.

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

A 3 terminal button actuator microswitch to fit all types of push buttons and joysticks.

A 3" wheel built from polyurethane, designed to take heavy loads. Made with a mounting bracket to allow for easy assembly.

High efficiency and Low temperature 3.3 Volt, 5 Volt, 12 Volt Power Supply suitable for all late model CRT and LCD Arcade Cabinets. Ideal for current series game boards including Taito X2, Chihiro, Lindberg, Naomi and more.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

30mm Round Arcade Push Button with Built-In Microswitch, Black in colour and is a great economical substitute for the popular Brand Name push buttons on general arcade machines and home console joystick. Built-in Momentary contact microswitch and snap-in clip for direct installation.