All Products

The Naomi (New Arcade Operation Machine Idea) motherboard is based on the same system-architecture as the Sega Dreamcast. The Naomi motherboard uses a Hitachi SH-4 CPU, PowerVR Series 2 GPU and a Yamaha AICA based sound system.

Note: Sega Naomi Motherboard Only (Sega Parts 840-0016D-01) , no Rom board Included

The Naomi (New Arcade Operation Machine Idea) motherboard is based on the same system-architecture as the Sega Dreamcast. The Naomi motherboard uses a Hitachi SH-4 CPU, PowerVR Series 2 GPU and a Yamaha AICA based sound system.

Note: Sega Naomi Motherboard Only (Sega Parts 840-0016D-01) , no Rom board Included

Coin mechanism face plate. Metallic, silver. No reject coin lever assembly.

LAI Relay PCB

The RM5 Evolution RM5-T10 is a Dual Price Totaliser with timer function. It is an electronic coin validator that allows any service, where cost is determined by time used, to be paid automatically. It is particularly suited to car washes, parking meters, laundromats and other self service applications. The validator itself is Top Load/Front Reject, but can be adapted to Front Load/Front Reject through the use of an RM5 face plate.

The RM5 Evolution is a series of high quality, Italian made electronic coin validators. The RM5T30 model is Top Load/Front Reject mechanism, but can be adapted to Front Load/Front Reject, through the use of an RM5 faceplate. When using the top loading face plate, the RM5 Evolution is completely interchangeable with NRI or C120 coin mechanisms.

The RM5 Evolution is an electronic coin validator for Australian coins. It is made in Italy and is a very high quality product. The RM5 Evolution is a Top Load/Bottom Reject mechanism, but can be adapted to be front loading through the use of an RM5 faceplate, however it will always be bottom rejecting.

Adjoining top coin entry for use on flat surfaces. Smaller dimensions for ease of installation.

This Front Loading Face Plate is for use with the RM5 series of electronic coin mechanisms. This face plate will cause the coin to insert into the front slot of the coin mech.

A face plate for use a top loading coin mech. This face plate will cause the coin to insert into the top slot of the coin mech.

Adjoining top coin entry for use on sloped surfaces.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

A transparent cover for the coin mech face plate.

A 4 digital display with the housing and wiring to easily mount into a machine.

A 4 digital display with the wiring to easily mount into a machine.

Housing for the RM5 Series Electronic Validators and Totalisers.
Model: SPS41LCM4.
Designed to house all the models of the Comestero Group RM5 Evolution Validators and Totalisers.
Made of sturdy, lightweight black plastic.

Western Dream Interrupter Board

A replacement for the main PCB of the Boxer Matrix machine.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

A wiring Harness that is part of the cables needed to allow Naomi Hardware system games to be plugged into a Jamma Cabinet. The harness also comes with a Sound Amp.

PCB Credit Board for Ticket Dispenser Type 2

12 Volt Power Amp PCB Board.

MOLEX 12 Way Receptacle Plug. Brand New

TYCO ELECTRONICS / AMP 9 Way Plug Housing. Brand New, Plug only.

Spade cover for speaker terminals, power leads and lugs.

TYCO ELECTRONICS 15 Way Receptacle Housing. Brand New

TYCO ELECTRONICS Universal Mate Receptacle Housing, 4 Way N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 4 pin Female connector to be used with the 4 pin Male connector of the same series.

Potentiometer (Dual) 50 ohm

Potentiometer Knobs

Cable Gland

Small Hole Cover

Large Hole Cover

A standard length Jamma finger. Ideal for do it yourself work. Pins are clearly marked for ease of use.

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

Pump It Up Step Acrylic panel arrows are made of solid and durable acrylic material, suitable to replace the used dance platform's foot pads. customer screw out the metal square cover, then replace the new step acrylic pads on it, very easy and simple to recondition the used PIU dancing stage into "new" look.

Drum mania rubber pad for Cymbal Pad or Hi Hat Assembly. Also suitable for use with Percussion Freaks.

Drum Mania Rubber Pad for Drum Pad Assembly. Can be used to replace Snare, High Tom and Low Tom parts. Also suitable for use with Percussion Freaks.

A white wheel connected to a metal bracket which can be connected to anything with it's 4 screw points or by welding.

This fits in the corners of the floor panels of your DDR dance machines. They provide rubber corner protection of the components underneath the panel and help to keep everything in place.

Replacement light globe/bulb for the disco lights. Designed for DDR dance machines. 12V, 20W.

The Mars MS126 is an electronic coin mechanism for amusement applications. These units have a Top Load/Bottom Reject configuration.

The Mars ME126 is an electronic coin mechanism for amusement applications. These units have a Top Load/Bottom Reject configuration.

32MB of SD Ram compatiable, compatiable with PC and Photoplay machines. pc100 32mb 4m*16 sdram

This is a Coin Meter LCD counter that can count 4 inputs at the one time. It has the capability of displaying all 4 of these inputs at the same time, up to 7 digits per line. This unit can count up to 100 Coins Per Second and features a low power consumption design.

Non Original Display Rom for a Roller Coaster Tycoon Pinball Machine.