TYCO ELECTRONICS Universal Plug Housing, 2 Way Mate N Lok Plug is a part of the Universal Mate N Lock Series. A smaller variant of item #4336. This item is a 2 pin Male connector to be used with the 2 pin Female connector of the same series.

TYCO ELECTRONICS Universal Plug Housing, 4 Way Mate N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 4 pin Male connector to be used with the 4 pin Female connector of the same series.

5 pin male connector, each pin is split in half. Design as a housing connector for amusement equipment.

A RCPT housing, drawer connector, 12 position Metrimate. Built to take up to 12 wires/pins, unit comes with 2 holes on the ends of the unit for easy mounting.

A holder for a Non-Amplified Photomicrosensors. The sensors is threaded through the top of the holders. While the bottom 2 holes are for mounting purposes.

A different shaped sensor holder, also mountable.

A top loading electronic coin mech, with enhanced security features over the S5 & S6 models. Due to the enhanced security these mechs are generally used in gaming machines.

This model dispenses coins at a high speed, up to 600 coins per minute. It maintains accuracy and prevents coin overrun with the use of two proximity sensors.

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.
PLEASE NOTE - THIS STOCK IS SOLD AS-IS, BRAND NEW. PRODUCT CANNOT SUPPORT $5 AND CANNOT BE UPGRADED - no warranty.

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.
PLEASE NOTE - THIS STOCK IS SOLD AS-IS, BRAND NEW. PRODUCT CANNOT SUPPORT $5 AND CANNOT BE UPGRADED - no warranty.

A compact power supply that outputs at 24V 2.3A. The Input can be 100~250V 1.6A 50/60/440Hz or DC 120~300 1A.

Fluorescent Ballast For 15W Lamp is a durable and long lasting semi low loss ballast for a fluorescent 15W lamp from ATCO. This ballast emits a massive power of 250v / 50Hz and is suitable for most fluorescent light applications. Furthermore coming from a credible manufacturer such as ATCO, you know that you are going to have bright powerful lights for a long time.

A plastic spacer which is mountable thanks to the metal stud attached. The user can mount a number of these together, screwing one into the back of another to make a bigger space.

On/off power rocker switch used to regulate power. 2 Position on and off. The Canal R Series is suitable for 125 and 250 voltage systems.

A noise filter designed to have 250V plugged directly into it with a maximum load of 6A. Has 3 terminals at the back to wire in the power.

A 6 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp is included). Made by Spain's Industrias Lorenzo company.

A 5 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp/switch is not included). Made by Spain's Industrias Lorenzo company.

This noise filter is designed for low impedance loads to supress line to ground and line to line interference. The filter is enclosed in a metal case and terminals on both sides.

Cam metal door lock with key in 15mm length cylinder including latch. The key can be removed only in the locked position. 90 degree turn between locked and unlocked positions.

Bladed Microswitch made by FTM. For use with arcade buttons for short panels.

6 pin male connector, each pin is split in half. Design as a housing connector for amusement equipment.

Pacific Coin Validator PCB: Model - Pacific 02

A Interface PCB for the Star Print system used in Pacific Gaming machines.

Designed to hold fuses up to 16A for 250V equipment. The fuses is screwed into the holder. The holder has also be screwed into the equipment for ease of use. The holder has 4 terminals.

240 volt to 12 volt transformer.

A medal game, where for each coin the player inserts the roulette wheel spins. The train advances the number of space shown on the wheel. The main objective is to get the train across the finish line.

The gun board expansion slot used with Atomiswave motherboards for gun games like Extreme Hunting.

A dummy button to put in place of a arcade push button. Allowing the operator to alter the control panel to suit games with less buttons.

A Mini Arcade Push Button with a inbuilt microswitch.

A set of 4 plastic feet and screws used to mount a pcb safely into a cabinet.

Arcade pushbutton 33mm includes microswitch

A replacement pink foot panel for the Dance Dance Revolution Machine

A replacement foot panel for the Dance Dance Revolution DDR Machine.

A 3" wheel built from polyurethane, designed to take heavy loads. Made with a mounting bracket to allow for easy assembly.

DDR Red floor neon light part for your Dance Dance Revolution (DDR) floor panel.

Sanwa snap-in OBSF-30 button. Widely used for buttons in Japanese cabinets like Blast City, Versus City, etc. It features a slightly convex plunger and snap-in installation (can be mounted in material with a thickness from 2 to 5 mm).

Sanwa snap-in OBSF-30 button, Pink in colour. Widely used for buttons in Japanese cabinets like Blast City, Versus City, etc. It features a slightly convex plunger and snap-in installation (can be mounted in material with a thickness from 2 to 5 mm).

Microswitch with Roller Blade suitable for arcade machines, pinballs and industrial applications.

The Naomi (New Arcade Operation Machine Idea) motherboard only (faulty) is based on the same system-architecture as the Sega Dreamcast. The Naomi motherboard uses a Hitachi SH-4 CPU, PowerVR Series 2 GPU and a Yamaha AICA based sound system.

Coin mechanism face plate. Metallic, silver. No reject coin lever assembly.

LAI Relay PCB

A coin counting machine that can count and compare any amount of coins or tokens. The unit comes with a graphical display to make operating the unit even easier.

The RM5 Evolution RM5-T10 is a Dual Price Totaliser with timer function. It is an electronic coin validator that allows any service, where cost is determined by time used, to be paid automatically. It is particularly suited to car washes, parking meters, laundromats and other self service applications. The validator itself is Top Load/Front Reject, but can be adapted to Front Load/Front Reject through the use of an RM5 face plate.

The RM5 Evolution is a series of high quality, Italian made electronic coin validators. The RM5T30 model is Top Load/Front Reject mechanism, but can be adapted to Front Load/Front Reject, through the use of an RM5 faceplate. When using the top loading face plate, the RM5 Evolution is completely interchangeable with NRI or C120 coin mechanisms.

The RM5 Evolution is an electronic coin validator for Australian coins. It is made in Italy and is a very high quality product. The RM5 Evolution is a Top Load/Bottom Reject mechanism, but can be adapted to be front loading through the use of an RM5 faceplate, however it will always be bottom rejecting.

Adjoining top coin entry for use on flat surfaces. Smaller dimensions for ease of installation.

This Front Loading Face Plate is for use with the RM5 series of electronic coin mechanisms. This face plate will cause the coin to insert into the front slot of the coin mech.

A face plate for use a top loading coin mech. This face plate will cause the coin to insert into the top slot of the coin mech.

Adjoining top coin entry for use on sloped surfaces.