All Products

These light globes are generic pinball light globes (GE-44) and they are suitable for most pinball machines.

Deluxe machines like Daytona have the 50" rear projector tvs. The game board output RGB and these cables connector from the game to the TV as BNC connectors. The fourth cord is for sync and there is also a power cable if needed.

Drum mania rubber pad for Cymbal Pad or Hi Hat Assembly. Also suitable for use with Percussion Freaks.

Drum Mania Rubber Pad for Drum Pad Assembly. Can be used to replace Snare, High Tom and Low Tom parts. Also suitable for use with Percussion Freaks.

A white wheel connected to a metal bracket which can be connected to anything with it's 4 screw points or by welding.

This fits in the corners of the floor panels of your DDR dance machines. They provide rubber corner protection of the components underneath the panel and help to keep everything in place.

Replacement light globe/bulb for the disco lights. Designed for DDR dance machines. 12V, 20W.

Non Original Display Rom for a Roller Coaster Tycoon Pinball Machine.

A test panel complete with Service Button, Test Switch and 12V coin counter. Includes wiring for power and ground.

A wiring Harness that is part of the cables needed to allow Naomi Hardware system games to be plugged into a Jamma Cabinet. The harness also comes with a Sound Amp.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

A replacement for the main PCB of the Boxer Matrix machine.

12 Volt Power Amp PCB Board.

Potentiometer (Dual) 50 ohm

TYCO ELECTRONICS 15 Way Receptacle Housing. Brand New

TYCO ELECTRONICS Universal Mate Receptacle Housing, 4 Way N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 4 pin Female connector to be used with the 4 pin Male connector of the same series.

Potentiometer Knobs

Cable Gland

Small Hole Cover

Spade cover for speaker terminals, power leads and lugs.

A standard length Jamma finger. Ideal for do it yourself work. Pins are clearly marked for ease of use.

TYCO ELECTRONICS / AMP 9 Way Plug Housing. Brand New, Plug only.

MOLEX 12 Way Receptacle Plug. Brand New

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

Pump It Up Step Acrylic panel arrows are made of solid and durable acrylic material, suitable to replace the used dance platform's foot pads. customer screw out the metal square cover, then replace the new step acrylic pads on it, very easy and simple to recondition the used PIU dancing stage into "new" look.

Large Hole Cover

Western Dream Interrupter Board

LAI Relay PCB

DDR Red floor neon light part for your Dance Dance Revolution (DDR) floor panel.

The gun board expansion slot used with Atomiswave motherboards for gun games like Extreme Hunting.

Cam metal door lock with key in 15mm length cylinder including latch. The key can be removed only in the locked position. 90 degree turn between locked and unlocked positions.

Bladed Microswitch made by FTM. For use with arcade buttons for short panels.

A noise filter designed to have 250V plugged directly into it with a maximum load of 6A. Has 3 terminals at the back to wire in the power.

240 volt to 12 volt transformer.

A Interface PCB for the Star Print system used in Pacific Gaming machines.

A 6 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp is included). Made by Spain's Industrias Lorenzo company.

This noise filter is designed for low impedance loads to supress line to ground and line to line interference. The filter is enclosed in a metal case and terminals on both sides.

A compact power supply that outputs at 24V 2.3A. The Input can be 100~250V 1.6A 50/60/440Hz or DC 120~300 1A.

A Blanking Plate is used to cover holes in equipment. In such equipment as arcade and gaming machines, cars, etc.

Fluorescent Ballast For 15W Lamp is a durable and long lasting semi low loss ballast for a fluorescent 15W lamp from ATCO. This ballast emits a massive power of 250v / 50Hz and is suitable for most fluorescent light applications. Furthermore coming from a credible manufacturer such as ATCO, you know that you are going to have bright powerful lights for a long time.

Tiger Scan is specially designed for less demanding applications. It is has a number of great features such as rotating gobos with indexed position, two-colour and rainbow effect beams and many others.

Namco PCB

springs small

LAI Swipe Card PCB

Network Card (used)

Test Panel for Volume Buttons

Route 66- Dreamcast memory card or rumble pack